Air Balance XL
HEPA H13 Filter

1. Switch off the air purifier and unplug it from the power socket.
2. Turn the air purifier upside down so that the bottom with the feet is facing up. Place it on a soft surface to avoid scratching it. On the edge of the bottom cover, you’ll find an ARROW pointing to the CLOSE position. Turn the bottom cover anti-clockwise from CLOSE to OPEN to remove it.
3. Remove the old filter from the purifier.
4. Take the plastic wrapping off the new filter.
5. Insert the new filter into the purifier.
6. Place the bottom cover back on with the ARROW pointing to OPEN, then turn it clockwise towards CLOSE. When you hear a click, the bottom cover is securely attached.
7. Plug the purifier back in and switch it on.
8. Reset the filter replacement indicator
   (This ensures that the red filter indicator light turns off again):
   • Make sure the air purifier is plugged in.
   • Switch the purifier off .
   • Press and hold for 3 seconds. The light will turn on.
   • Press and hold again for 3 seconds. The light will turn off, indicating the reset is complete.

You can order a replacement filter at Air Balance Filter.

To ensure the air purifier operates efficiently and to extend its lifespan, it is recommended to clean the filter once a month using a vacuum cleaner.

Attach the brush nozzle to the vacuum hose and use it to remove dust from the outside of the filter, the inside of the filter housing, and the base plate.

Do not wash the filter with water or any other liquid.

The filter should be replaced when the filter indicator lights up. It is also recommended to replace the air filter every 6 to 8 months, depending on how often the purifier is used. Be alert to the following signs that indicate the filter may need replacing:

• Increased noise levels
• Reduced airflow
• A clogged filter
• Stronger or lingering odours

You can order a replacement filter at Air Balance Filter.