Air Balance Ultra
HEPA H13 Filterset

1. Turn off the air purifier and unplug it from the wall socket.
2. Remove both old filters from the air purifier.
3. Remove the plastic film from the new filters.
4. Place the new filters into the air purifier and reattach the front panel.
5. Plug the unit back into the wall socket and turn the air purifier on .
6. Reset the filter indicator
   After replacing the filter, the filter indicator may still show red. By performing a reset, the air purifier recognises that new filters have been installed.
   • Insert the plug into the mains socket and switch the air purifier on
   • Press and hold the filter indicator button for 3 seconds
   • When you hear a ping sound, the reset has been successful. The light will return to white.

You can order a replacement filterset at Air Balance Ultra Filter.

To ensure the air purifier operates efficiently and to extend its lifespan, it is recommended to clean the filter once a month using a vacuum cleaner.

Attach the brush nozzle to the vacuum hose and use it to remove dust from the outside of the filter, the inside of the filter housing, and the base plate.

Do not wash the filter with water or any other liquid.

Both filters must be replaced when the indicator turns red.

If the indicator is yellow, the lifespan of both filters is less than 5%

It is also recommended to replace the air filter every 6 to 8 months, depending on how often the purifier is used. Be alert to the following signs that indicate the filter may need replacing:

• Increased noise levels
• Reduced airflow
• A clogged filter
• Stronger or lingering odours

You can order a replacement filterset at Air Balance Ultra Filter.